BMW 745i Fuel System, Gasoline,delivery Recall | June 03, 2002

2002 BMW 745i Fuel System, Gasoline,delivery Recall | June 03, 2002

On Certain Passenger Vehicles, The Electric Fuel Pump Runs At A Rotational Speed That Could Result In Reduced Lubrication Of Its Internal Components. Over An Extended Period Of Time, Wear-induced Internal Damage To The Fuel Pump Could Result In Insufficient Fuel Supply To The Engine When The Fuel Tank Contains One-third Or Less Of Its Maximum Fuel Capacity.

If This Were To Occur, The Engine Could Stall And Not Be Restarted Until More Fuel Was Added To The Fuel Tank. This Could Occur Even Though The Fuel Gauge Indicated That Fuel Still Remained In The Tank.

Summary Of Corrective Actions Taken: Dealers Will Reprogram The Fuel Pump Control System. Owner Notification Began June 28, 2002. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-332-4269.

Customers Can Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on June 03, 2002 for 2002 BMW 745i, manufactured by BAYERISCHE MOTOREN WERKE, in response to Fuel System, Gasoline,delivery problems.

BMW 540it Exterior Lighting,brake Lights,switch Recall | Feb 17, 2000

2000 BMW 540it Exterior Lighting,brake Lights,switch Recall | Feb 17, 2000

Vehicle Description: Passenger Vehicles. The Brake Lamps In These Vehicles Are Controlled By A Switch Activated By The Movement Of The Brake Pedal. This Switch Could Fail Internally, Causing It To Remain Either In The “brake Lamps Off” Position Or In The “brake Lamps On” Position.

If This Happens, The Brake Lamps Either Will Not Operate Or Will Be Continuously Illuminated, Regardless Of Brake Pedal Position.

Summary Of Corrective Actions Taken: Dealers Will Inspect And, If Necessary, Replace The Existing Brake Lamp Switch With An Improved Switch.

Owner Notification Began May 15, 2000.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-1117.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Feb 17, 2000 for 2000 BMW 540it, manufactured by BAYERISCHE MOTOREN WERKE, in response to Exterior Lighting,brake Lights,switch problems.

BMW 540ia Electrical System,battery,cables Recall | Jan 04, 1999

1999 BMW 540ia Electrical System,battery,cables Recall | Jan 04, 1999

Vehicle Description: Passenger Vehicles. The Thickness Of The Main Positive Electrical Cable (generator To Starter) Insulation Is Less Than Specified, Making It Susceptible To Being Abraded Or Cut By The Clip That Secures The Cable To The Generator.

The Cable Insulation Can Be Worn Away, Exposing The Wire. The Wire Could Contact The Clip Or A Short Circuit Could Occur.

Summary Of Corrective Actions Taken: Dealers Will Apply A Thickness Of Insulating Tape To The Cable In The Area Of The Clip, And Install A Revised Clip.

Owner Notification Began February 26, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-0117. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Jan 04, 1999 for 1999 BMW 540ia, manufactured by BAYERISCHE MOTOREN WERKE, in response to Electrical System,battery,cables problems.

BMW 540i Electrical System,battery,cables Recall | Jan 04, 1999

1999 BMW 540i Electrical System,battery,cables Recall | Jan 04, 1999

Vehicle Description: Passenger Vehicles. The Thickness Of The Main Positive Electrical Cable (generator To Starter) Insulation Is Less Than Specified, Making It Susceptible To Being Abraded Or Cut By The Clip That Secures The Cable To The Generator.

The Cable Insulation Can Be Worn Away, Exposing The Wire. The Wire Could Contact The Clip Or A Short Circuit Could Occur.

Summary Of Corrective Actions Taken: Dealers Will Apply A Thickness Of Insulating Tape To The Cable In The Area Of The Clip, And Install A Revised Clip.

Owner Notification Began February 26, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-0117. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Jan 04, 1999 for 1999 BMW 540i, manufactured by BAYERISCHE MOTOREN WERKE, in response to Electrical System,battery,cables problems.

BMW 540iat Electrical System,battery,cables Recall | Jan 04, 1999

1999 BMW 540iat Electrical System,battery,cables Recall | Jan 04, 1999

Vehicle Description: Passenger Vehicles. The Thickness Of The Main Positive Electrical Cable (generator To Starter) Insulation Is Less Than Specified, Making It Susceptible To Being Abraded Or Cut By The Clip That Secures The Cable To The Generator.

The Cable Insulation Can Be Worn Away, Exposing The Wire. The Wire Could Contact The Clip Or A Short Circuit Could Occur.

Summary Of Corrective Actions Taken: Dealers Will Apply A Thickness Of Insulating Tape To The Cable In The Area Of The Clip, And Install A Revised Clip.

Owner Notification Began February 26, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-0117. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Jan 04, 1999 for 1999 BMW 540iat, manufactured by BAYERISCHE MOTOREN WERKE, in response to Electrical System,battery,cables problems.

BMW 740ila Electrical System,battery,cables Recall | Jan 04, 1999

1999 BMW 740ila Electrical System,battery,cables Recall | Jan 04, 1999

Vehicle Description: Passenger Vehicles. The Thickness Of The Main Positive Electrical Cable (generator To Starter) Insulation Is Less Than Specified, Making It Susceptible To Being Abraded Or Cut By The Clip That Secures The Cable To The Generator.

The Cable Insulation Can Be Worn Away, Exposing The Wire. The Wire Could Contact The Clip Or A Short Circuit Could Occur.

Summary Of Corrective Actions Taken: Dealers Will Apply A Thickness Of Insulating Tape To The Cable In The Area Of The Clip, And Install A Revised Clip.

Owner Notification Began February 26, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-0117. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Jan 04, 1999 for 1999 BMW 740ila, manufactured by BAYERISCHE MOTOREN WERKE, in response to Electrical System,battery,cables problems.

BMW 740ia Electrical System,battery,cables Recall | Jan 04, 1999

1999 BMW 740ia Electrical System,battery,cables Recall | Jan 04, 1999

Vehicle Description: Passenger Vehicles. The Thickness Of The Main Positive Electrical Cable (generator To Starter) Insulation Is Less Than Specified, Making It Susceptible To Being Abraded Or Cut By The Clip That Secures The Cable To The Generator.

The Cable Insulation Can Be Worn Away, Exposing The Wire. The Wire Could Contact The Clip Or A Short Circuit Could Occur.

Summary Of Corrective Actions Taken: Dealers Will Apply A Thickness Of Insulating Tape To The Cable In The Area Of The Clip, And Install A Revised Clip.

Owner Notification Began February 26, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-0117. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Jan 04, 1999 for 1999 BMW 740ia, manufactured by BAYERISCHE MOTOREN WERKE, in response to Electrical System,battery,cables problems.

BMW 328i Service Brakes, Hydraulic,pedals And Linkages Recall | May 03, 1999

1999 BMW 328i Service Brakes, Hydraulic,pedals And Linkages Recall | May 03, 1999

Vehicle Description: Passenger Vehicles. It Is Possible That The Retaining Clip That Secures The Brake Booster Pushrod To The Brake Pedal Arm Was Not Properly Installed During Production. It Is Possible For The Clip To Detach From The Pin On The Brake Pedal Arm Allowing The Pushrod To Disconnect From The Arm.

If This Occurs, Braking Is Not Possible.

Summary Of Corrective Actions Taken: Dealers Will Inspect The Clip For Tight Installation And Replace The Clip If It Is Loose.

Owner Notification Began May 14, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-1117.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on May 03, 1999 for 1999 BMW 328i, manufactured by BAYERISCHE MOTOREN WERKE, in response to Service Brakes, Hydraulic,pedals And Linkages problems.

BMW 323i Service Brakes, Hydraulic,pedals And Linkages Recall | May 03, 1999

1999 BMW 323i Service Brakes, Hydraulic,pedals And Linkages Recall | May 03, 1999

Vehicle Description: Passenger Vehicles. It Is Possible That The Retaining Clip That Secures The Brake Booster Pushrod To The Brake Pedal Arm Was Not Properly Installed During Production. It Is Possible For The Clip To Detach From The Pin On The Brake Pedal Arm Allowing The Pushrod To Disconnect From The Arm.

If This Occurs, Braking Is Not Possible.

Summary Of Corrective Actions Taken: Dealers Will Inspect The Clip For Tight Installation And Replace The Clip If It Is Loose.

Owner Notification Began May 14, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-1117.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on May 03, 1999 for 1999 BMW 323i, manufactured by BAYERISCHE MOTOREN WERKE, in response to Service Brakes, Hydraulic,pedals And Linkages problems.

BMW Z3 Power Train,driveline,differential Unit Recall | Oct 07, 1999

1999 BMW Z3 Power Train,driveline,differential Unit Recall | Oct 07, 1999

Vehicle Description: Passenger Vehicles. The Rear Axle Differential May Contain Ring Gear Bolts That Were Incorrectly Torqued During Assembly. The Bolt Or Bolts Could Loosen Leading To Noise From The Differential.

The Bolt Or Bolts Could Loosen Leading To Noise From The Differential And If A Bolt Were To Completely Work Loose From Its Mount, Lockup Of The Rear Axle Could Occur.

Summary Of Corrective Actions Taken: Dealers Will Inspect The Vehicle’s Differential And If Involved, Will Replace It.

Owner Notification Began December 10, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-1117.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Oct 07, 1999 for 1999 BMW Z3, manufactured by BAYERISCHE MOTOREN WERKE, in response to Power Train,driveline,differential Unit problems.