BMW F650 Cs Wheels,lugs/nuts/bolts Recall | July 23, 2002

2002 BMW F650 Cs Wheels,lugs/nuts/bolts Recall | July 23, 2002

On Certain Motorcycles, It Is Possible That The Hex Nut That Secures The Wheel To The Gearbox Output Shaft Was Tightened Incorrectly During The Vehicle Assembly. As A Result, The Nut Could Loosen During Vehicle Operation. If This Happens, The Belt Wheel Would Itself Loosen On The Output Shaft, Resulting In Damage To The Internal Splines Of The Wheel And To The External Splines Of The Output Shaft As The Vehicle Is Operated.

Over Time, The Splines Could Be Damaged To The Extent That The Output Shaft Would Not Longer Operate The Drive Belt, Resulting In A Loss Of Drive Capability At The Rear Wheel.

Summary Of Corrective Actions Taken: Dealers Will Inspect The Hex Nut Torque And Adjust The Tightness If Necessary, And Secure The Nut With Loctite. Owner Notification Began September 10, 2002. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-1117, Option #4.

Also, Customers Can Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on July 23, 2002 for 2002 BMW F650 Cs, manufactured by BAYERISCHE MOTOREN WERKE, in response to Wheels,lugs/nuts/bolts problems.

BMW F650 Cs Wheels Recall | July 23, 2002

2002 BMW F650 Cs Wheels Recall | July 23, 2002

On Certain Motorcycles, Due To A Manufacturing Defect, It Is Possible That The Wheel Could Develop A Crack. Over Time, The Crack Could Worsen To The Point That The Wheel Failed And The Drive Belt Derailed.

This Would Result In A Loss Of Drive Capability At The Rear Wheel, Increasing The Risk Of A Crash.

Summary Of Corrective Actions Taken: Dealers Will Replace The Rear Drive Belt Wheel. Owner Notification Began September 10, 2002. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-1117, Option #4.

Also, Customers Can Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on July 23, 2002 for 2002 BMW F650 Cs, manufactured by BAYERISCHE MOTOREN WERKE, in response to Wheels problems.

BMW F650 Cs Service Brakes, Hydraulic Recall | May 20, 2002

2002 BMW F650 Cs Service Brakes, Hydraulic Recall | May 20, 2002

On Certain Motorcycles, The Screws That Attach The Rear Brake Caliper To The Rear Swing Arm Were Not Tightened Correctly During Assembly. The Screws Could Loosen During Vehicle Operation And Eventually Fall-out, Allowing The Rear Caliper To Separate From Its Mount.

If The Caliper Becomes Trapped Between The Rear Wheel And The Swing Arm, It Could Disconnect From The Brake Line, Resulting In A Loss Of Rear Braking Capability And Increasing The Risk Of A Crash.

Summary Of Corrective Actions Taken: Dealers Will Check The Torque Of The Rear Brake Caliper Attachment Screws And Retighten Them To The Proper Value If Necessary. Owner Notification Began July 15, 2002. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Bmw At 1-800-831-1117.

Customers Can Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on May 20, 2002 for 2002 BMW F650 Cs, manufactured by BAYERISCHE MOTOREN WERKE, in response to Service Brakes, Hydraulic problems.