BMW 325 Seats Recall | Apr 14, 1992

1992 BMW 325 Seats Recall | Apr 14, 1992

The Vehicle Failed To Comply With Fmvss 208. The Driver’s Chest Resultant Acceleration Exceeded The Allowable 60 G’s In A Crash Test When The Seat Height Changes Adjustment Under Severe Frontal Impact.

The Driver Of A Vehicle Faces Increased Risk Of Injuryin The Event Of A Sudden Stop Or Accident.

Summary Of Corrective Actions Taken: Install A Damper On The Underside Of The Driver’s Seat Cushion, Between The Cushion Frame And The Seat Track. In A Severe Frontal Impact The Damper Will Hydraulically Lock, Preventing A Change In Seat Height.

System: Interior Systems: Fmvss 208.vehicle Description: Passenger Car, Models 325i And 325ia.

This recall was issued on Apr 14, 1992 for 1992 BMW 325, manufactured by BAYERISCHE MOTOREN WERKE, in response to Seats problems.

BMW 525 Electrical System,fuses And Circuit Breakers Recall | Dec 02, 1992

1992 BMW 525 Electrical System,fuses And Circuit Breakers Recall | Dec 02, 1992

The 80-ampere Fusible Link Located In The Engine Compartment Can Develop Mechanical Weakness Due To Aging And Thermal Stresses, And Can Break.

If The Fusible Link Breaks, The Total Vehicle Electricalsystem Would Be Interrupted By The Open Circuit. All Electrical Systems Wouldbe Involved, And The Engine Would Not Start, Or Would Stop, If Running. Thiswould Result In Loss Of Power To The Vehicle Without Prior Warning, Loss Ofhazard Warning Lights, Loss Of Lights At Night And Possibly A Vehicle Accident.

Summary Of Corrective Actions Taken: Reroute The Electrical Cables In The Engine Compartment To Reduce The Current Flow Through The Fusible Link, And Replace The Old Fusible Link.

System: Electrical System.vehicle Description: Passenger Vehicles, Models 525i And 525ia.

This recall was issued on Dec 02, 1992 for 1992 BMW 525, manufactured by BAYERISCHE MOTOREN WERKE, in response to Electrical System,fuses And Circuit Breakers problems.

BMW R100 Service Brakes, Hydraulic,foundation Components,disc,pads Recall | June 05, 1992

1992 BMW R100 Service Brakes, Hydraulic,foundation Components,disc,pads Recall | June 05, 1992

The Bonding Technique Used Between The Pad And The Backing Plate Can Result In A Porous Joint Layer Which Water And Salt Can Penetrate, Resulting In Corrosion Of The Backing Plate.

The Front Brake Pads Can Separate Partially Or Completelyfrom The Corroded Backing Plate, Resulting In Decreased Stopping Ability And Apossible Vehicle Accident.

Summary Of Corrective Actions Taken: Replace The Front Brake Pads With New Pads Utilizing A Different Bonding Method Which Ensures A Non-porous Joint Layer To Prevent Water And Salt Penetration Of The Backing Plate.

System: Brake Pads.vehicle Description: Motorcycles.

This recall was issued on June 05, 1992 for 1992 BMW R100, manufactured by BAYERISCHE MOTOREN WERKE, in response to Service Brakes, Hydraulic,foundation Components,disc,pads problems.

BMW 325 Visibility,windshield Wiper/washer,switch/wiring Recall | Sept 29, 1992

1992 BMW 325 Visibility,windshield Wiper/washer,switch/wiring Recall | Sept 29, 1992

The Screw That Secures The Wiper Switch At One Location And Which Also Provides A Ground For The Wiper Circuit, Loosens As The Switch Is Operated Over A Long Period Of Time. As The Screw Continues To Loosen The Ground For The Wiper Circuit Is Intermittently Or Completely Lost.

The Intermittent Or Complete Loss Of The Wiper Circuitground Causes The Wipers To Operate Erratically Or Not At All, Resulting Inreduced Visibility For The Driver In Inclement Weather Conditions.

Summary Of Corrective Actions Taken: Relocate The Wiper Switch Ground Wire Attachment On The Steering Column.

System: Visual; Windshield Wiper.vehicle Description: Passenger Cars.

This recall was issued on Sept 29, 1992 for 1992 BMW 325, manufactured by BAYERISCHE MOTOREN WERKE, in response to Visibility,windshield Wiper/washer,switch/wiring problems.

BMW 735 Vehicle Speed Control Recall | July 10, 1992

1992 BMW 735 Vehicle Speed Control Recall | July 10, 1992

Some Of These Vehicles Are Equipped With A Throttle Housing On Which The Throttle Valve Shaft Retaining Nut Was Not Sufficiently Tightened.

If The Nut Were To Loosen, Movement Of The Throttle Valvecould Be Impaired, Resulting In The Vehicle Being Unable To Decelerate When Thegas Pedal Is Released.

Summary Of Corrective Actions Taken: Those Throttle Housings With Suspect Manufacturing Codes Will Have The Throttle Valve Shift Retaining Nut Torque Tested, And Those With Insufficient Nut Torque Will Be Replaced.

System: Throttle.vehicle Description: Passenger Cars.

This recall was issued on July 10, 1992 for 1992 BMW 735, manufactured by BAYERISCHE MOTOREN WERKE, in response to Vehicle Speed Control problems.

BMW 535 Vehicle Speed Control Recall | July 10, 1992

1992 BMW 535 Vehicle Speed Control Recall | July 10, 1992

Some Of These Vehicles Are Equipped With A Throttle Housing On Which The Throttle Valve Shaft Retaining Nut Was Not Sufficiently Tightened.

If The Nut Were To Loosen, Movement Of The Throttle Valvecould Be Impaired, Resulting In The Vehicle Being Unable To Decelerate When Thegas Pedal Is Released.

Summary Of Corrective Actions Taken: Those Throttle Housings With Suspect Manufacturing Codes Will Have The Throttle Valve Shift Retaining Nut Torque Tested, And Those With Insufficient Nut Torque Will Be Replaced.

System: Throttle.vehicle Description: Passenger Cars.

This recall was issued on July 10, 1992 for 1992 BMW 535, manufactured by BAYERISCHE MOTOREN WERKE, in response to Vehicle Speed Control problems.

BMW K100 Service Brakes, Hydraulic,foundation Components,disc,pads Recall | June 05, 1992

1992 BMW K100 Service Brakes, Hydraulic,foundation Components,disc,pads Recall | June 05, 1992

The Bonding Technique Used Between The Pad And The Backing Plate Can Result In A Porous Joint Layer Which Water And Salt Can Penetrate, Resulting In Corrosion Of The Backing Plate.

The Front Brake Pads Can Separate Partially Or Completelyfrom The Corroded Backing Plate, Resulting In Decreased Stopping Ability And Apossible Vehicle Accident.

Summary Of Corrective Actions Taken: Replace The Front Brake Pads With New Pads Utilizing A Different Bonding Method Which Ensures A Non-porous Joint Layer To Prevent Water And Salt Penetration Of The Backing Plate.

System: Brake Pads.vehicle Description: Motorcycles.

This recall was issued on June 05, 1992 for 1992 BMW K100, manufactured by BAYERISCHE MOTOREN WERKE, in response to Service Brakes, Hydraulic,foundation Components,disc,pads problems.

BMW K1 Service Brakes, Hydraulic,foundation Components,disc,pads Recall | June 05, 1992

1992 BMW K1 Service Brakes, Hydraulic,foundation Components,disc,pads Recall | June 05, 1992

The Bonding Technique Used Between The Pad And The Backing Plate Can Result In A Porous Joint Layer Which Water And Salt Can Penetrate, Resulting In Corrosion Of The Backing Plate.

The Front Brake Pads Can Separate Partially Or Completelyfrom The Corroded Backing Plate, Resulting In Decreased Stopping Ability And Apossible Vehicle Accident.

Summary Of Corrective Actions Taken: Replace The Front Brake Pads With New Pads Utilizing A Different Bonding Method Which Ensures A Non-porous Joint Layer To Prevent Water And Salt Penetration Of The Backing Plate.

System: Brake Pads.vehicle Description: Motorcycles.

This recall was issued on June 05, 1992 for 1992 BMW K1, manufactured by BAYERISCHE MOTOREN WERKE, in response to Service Brakes, Hydraulic,foundation Components,disc,pads problems.

BMW K1199 Service Brakes, Hydraulic,foundation Components,disc,pads Recall | June 05, 1992

1992 BMW K1199 Service Brakes, Hydraulic,foundation Components,disc,pads Recall | June 05, 1992

The Bonding Technique Used Between The Pad And The Backing Plate Can Result In A Porous Joint Layer Which Water And Salt Can Penetrate, Resulting In Corrosion Of The Backing Plate.

The Front Brake Pads Can Separate Partially Or Completelyfrom The Corroded Backing Plate, Resulting In Decreased Stopping Ability And Apossible Vehicle Accident.

Summary Of Corrective Actions Taken: Replace The Front Brake Pads With New Pads Utilizing A Different Bonding Method Which Ensures A Non-porous Joint Layer To Prevent Water And Salt Penetration Of The Backing Plate.

System: Brake Pads.vehicle Description: Motorcycles.

This recall was issued on June 05, 1992 for 1992 BMW K1199, manufactured by BAYERISCHE MOTOREN WERKE, in response to Service Brakes, Hydraulic,foundation Components,disc,pads problems.

1992 BMW E31 Exterior Lighting Headlights Concealment Devices problems & defects.

BMW E31 Exterior Lighting Headlights Concealment Devices problems : 1.

Headlight Buckets Are Pointing At A 45 Degree Downwards, Causing A Problem To Driver To See The Road. Dealership Has Been Notified, And Solution Is To Replace Buckets At Four Hundred Dollars Each. *ak

Vehicle Identification Number (VIN):WBAEG2310NC. BMW E31 1992 problem was reported in CROFTON, MD. Vehicle was not using Cruise Control. FUEL TYPE: GAS.

1992 BMW E31 problems and complaints, and up-to-date recall information. If you are researching a used BMW E31, driving a 1992 BMW E31, or if you are planning to purchase one, review owner-reported Exterior Lighting Headlights Concealment Devices problems and defects.